ACPI X64-Based PC: Definition, What It Is, & More
If you are looking for an ACPI x64 based PC, there are a few different things you need to take into consideration. If you are building your own ACPI x64 based PC, there are even more things you need to think about.
ACPI stands for “Advanced Configuration and Power Interface.” It is one of the most commonly used methods to control the power stages of a PC and all of the attached accessories. ACPI allows for such functions as going into sleep mode, amongst others.
It is a standard that has been set by the attached accessories, operating system, firmware, microprocessor, and other parts. There are significant parts exposed as data tables and functionings within the system firmware.
Along with that, it is present in the device-specific interfaces. As it has driver behavior, it shows up in the device manager even though it isn’t necessarily a driver.
What Is An ACPI X64-Based PC?
When you buy or build an ACPI x64 based PC, it dictates the operating system communication to distribute power to different parts of your computer, including the hard drive. Originally, it was installed on laptops to help save power and battery life. Since Windows 98, ACPI has been present in almost all Windows computers, replacing APM (Advanced Power Management) in every operating system from Windows Vista to now.
ACPI helps with communication to a computer’s BIOS and instructs the BIOs to power down specific features. For example, it will tell your computer to go to sleep if you haven’t been on it within a set amount of time.
ACPI Power States
ACPI has different modes that are referred to as states. It is important to know these states as you build a computer and look at different specs. These states will control different parts of a PC. The four states are:
- Working (G0)
- Sleeping (G1)
- Soft Off (G2)
- Mechanical Off (G3)
Within these states, there are other sleep states and codes to know, including: S0, S1, S2, S3, S4 and S5. Each sleep state refers to a different action or lack of action. For example, if you do not type on your computer for a set amount of time, the monitor will power down to say power, which is labeled as Global state G0 with Sleep state S0.
ACPI X64 Based PC Driver Update
Occasionally, you will get a notification that you need to update the official ACPI x64-based PC Driver for Windows XP/7/Vista/8/8.1/10 32-bit and 64-bit versions (and presumably, any version moving forward.)
It is important to keep the ACPI X64 based PC driver updated because it controls more than just you think with your computer.
The sleep settings impact almost all functions you do, including:
- Monitors
- Audio & Sound
- Streaming
- Listening To Music
- Graphics & Video Adapters
- Modems & Network Adapters
- Printers
- Scanners
- Optical Disk Drives
- Other Devices
You can either set up automatic updates or install a utility that will ensure that your drivers stay updated. Or, you can make a note to update it manually. You should start to see some common signs when you need an update. However, to save your time, you may just want to invest in one of these tools.
What If The ACPI X64 Based PC Driver Update Doesn’t Work?
Different systems use different ACPI names and types. While you can edit your settings, it isn’t recommended. If you have gone through the process and updated your driver and there is still something wrong, it may not be the ACPI X64 itself but rather one of the processes or accessories that depend on it.
Network Adapter Driver: The quality of your network adapter driver can impact the ACPI X64-Based PC motherboard. Outdated or poor quality network adapters can cause your Ethernet to malfunction or consume vital resources unnecessarily. If this is the issue, you will generally have problems with playback and recording.
This is another driver that you want to keep updated at all times. If you need to replace your network adapter driver for acpi x64 compatibility, you will either have to go directly to the motherboard or into the PCI or PCIe cards.
In general, you want to keep all of your drivers updated at all times. Updating them all manually can be a bit of a hassle, but some people do it this way. Others will allow automatic updates, but that can present problems as well. Instead, most people will use some sort of tool that will look for, download, and install updates as necessary. These tools also let you revert back to an older version if something goes wrong.
Adjust Power Options: If you want to override the ACPI x64, you can select this option. This prevents your computer from going into Sleep Mode at any time. You will have significantly shorter battery life and no energy savings. Now, this can also overpower the hard drive and disable USB selective suspend, which can cause USB powered devices to overheat (mostly those that charge using USB).
Automatically Update Drivers On Windows
Most people would recommend having Windows automatically update their drivers and information for your hardware and devices. For those who build their own computers, there is a tendency to ignore this recommendation because you want to do everything on your own. However, it is essential for those who want to ensure that their hardware and devices work properly.
With automatic updates turned on, Windows is able to find and download two different kinds of updates that are important for your computer and any devices that are connected to your computer. The first is the one we will focus on, which is the drivers, including the ACPI x64. Without drivers, any and all devices that you attach to your computer won’t work properly.
The same can be said about basic functions on your computer, such as sleep mode. With this option enabled, Windows will be able to automatically check to see if there are any drivers available for new devices connected to your computer.
At the same time, Windows will be able to locate updates to existing drivers for hardware that has been connected to your computer in the past. However, they will not be able to install those optional updates. You can change the settings to get a notification that you need to go into settings and manually update those drivers.
This is important because while you do still need to do the work, you will get the notification. You can then go into Windows Updates in the Control Panel, check for updates, and then view and install driver updates that are available for your computer. This should make things work properly again.
Unfortunately, when you turn on this feature, you are also allowing information gathering. Windows will be able to download icons for any hardware devices that you connect and then collect detailed information about them.
This makes it easier for the computer to function, but some people do not like giving this information to their computers.
Most people won’t have to worry about anything when it relates back to their ACPI X64 based PCs because they are programmed to work as is. However, if you are building your own computer, you will need to think about it in relation to your motherboard’s specs, other hardware you have, and your updating schedule.
What You Need to Know About ACPI x64-Based PC
If you are a computer enthusiast, then you will already know that ACPI is one of the best features you can get on your motherboard. Not only does it help you save battery and power on laptops, but it also has a big impact on your computer’s performance.
In recent years, it has become more and more popular; most new motherboards support it. This is excellent news for gamers since there are many things you can do with ACPI to improve your games’ performance.
This article will focus on the three things you can do with ACPI to boost your computer’s performance: overclocking, underclocking, and power-saving features. Although we will focus on games in this article, you can apply these tips for everyday computer use.
But first thing first.
Table of Contents
What is ACPI x64-based PC?
When you buy or build an ACPI x64 based PC, it dictates the operating system communication to distribute power to different parts of your computer, including the hard drive. Originally, it was installed on laptops to help save power and battery life.
Since Windows 98, ACPI has been present in almost all Windows computers, replacing APM (Advanced Power Management) in every Windows Vista operating system.
Every operating system has its own ACPI version. Windows 8 uses ACPI 5.0; Windows 7 uses 4.0, etc. The number behind the acronym is the ACPI version. If you are looking for the best performance, it’s important to find out which version your motherboard supports since not all motherboards are created equal.
If you’re building a new computer, make sure your motherboard supports the latest version of ACPI to take full advantage of your motherboard’s features.
ACPI Power States
ACPI defines five different power states that your computer can be in, each state with its power consumption.
Standby (S3) and Sleep (S4)
The first two are Standby (S3) and Sleep (S4). The difference between them is that your computer is still running in S3, but most of your computer’s components are turned off. In S4, it is completely turned off, and you cannot use your computer until you wake it up.
ACPI Hibernation (S5)
The third power state is the ACPI Hibernation (S5) which saves your computer’s state on your hard drive and completely turns it off. It consumes the same power as an OFF state, but it’s slightly faster than standby or sleep modes.
G2/S5 Soft Off and G3 Mechanical Off
The next two states are the G2/S5 Soft Off and G3 Mechanical Off. Hibernation states are also called because your computer is off, but it’s faster to turn on than a complete shutdown.
This is because it shuts down only parts of your computer instead of every part at once, allowing it to boot faster without losing its state.
C0 (Working), C1E (Sleeping), and C3/C6 (Hibernation)
The last and most important power states to gamers are the three performance states: C0 (Working), C1E (Sleeping), and C3/C6 (Hibernation).
The first performance state is the C0, also called the “Working State” or the “Working Set Size.” It’s used when you are actively using your computer. It consumes exactly as much power as it needs to keep your computer running at its best performance.
The next state is the C1E or Sleeping State. It’s called “sleeping” because it’s a low-power sleep state with minimal power. The difference between it and the normal sleeping state is that your computer will enter this power-saving state faster since it does not have to save the state of your computer.
The last performance state is C3/C6 (Hibernation). Your computer will enter this state if you are not using it for 30 minutes. All your programs and applications are saved to your hard drive so that when you get back to your computer, it will be mostly turned on.
You can see these power-saving features in action by opening your Device Manager (search in Windows Search) and going to the Power Options section.
ACPI X64 Based PC Driver Update
When you build a new computer with Windows 8/8.1/10 pre-installed, your computer will have the latest version of ACPI. But if you upgrade to Windows 10 or build a new computer with Windows 7/8.1, your computer will have ACPI 4.0, the older version of the five power states listed above.
Every time a new version of Windows is released, it’s essential to upgrade your ACPI driver too. This will ensure that you’re taking full advantage of your computer’s power-saving features and getting the best out of your PC.
Every time you upgrade to a new version of Windows, make sure you also upgrade your ACPI x64-based PC drivers to ensure maximum performance and power saving.
You can set it to auto-update for maximum convenience or check for updates manually.
Why is ACPI Required?
That’s all fine, but what’s the point of all this? ACPI is required to give your computer the ability to save power when you aren’t using it. If your ACPI driver is missing, Windows will function as if each power state did not exist.
ACPI driver will calibrate your computer’s components and detect how much energy is necessary to keep them running at their peak performance.
Since this driver is essential to your computer’s power-saving features, it’s required for Windows to function correctly and stop applications from shutting down unexpectedly.
The ACPI driver is essential for Windows to function correctly. It also helps your computer use the power-saving features built into it. Over time, an ACPI driver update is necessary to keep a stable system and a good performance.
What Does ACPI Compliant Mean?
If your computer does not have ACPI installed, it will not have the power-saving features that Windows has, and it will not be capable of using the battery properly. It will also not be able to manage power throughout your system, which will affect your PC’s performance.
If your computer meets the Windows Logo requirements for ACPI, your hardware is ACPI compliant, and Windows has the drivers it needs to power on your computer.
ACPI is not an optional component in Windows since it’s required for all Windows’s power-saving features.
Your computer must have ACPI, and your operating system must be compatible with it for this technology to work.
How Do I Disable ACPI in Windows 10?
For some reason, you may need to disable ACPI in Windows 10. If your computer is not supported by Windows 8/8.1/10, it may have ACPI enabled on it.
In some specific cases, you might want to disable ACPI to change the power setting on your computer to “Maximum Performance.”
If you disable ACPI, then configure your power plan to use High Performance, your PC will work as an average computer does.
- Right-click on the Start button.
- Open the Device Manager.
- Expand the battery box in Device Manager.
- Right-click on the Microsoft ACPI device.
- Now choose Uninstall.
- Restart your computer.
You will see that the ACPI device is now gone from your Device Manager.
The specific cases that we mentioned above, where you might need to disable ACPI, are:
- When your laptop is not charging, and it is running on battery.
- When your computer is not charging, and you do not want to use the power-saving features of ACPI.
In this case, simply disabling ACPI will surely help. If your computer is not compatible with Windows 7/8/10, disabling ACPI can allow you to upgrade your operating system.
What is an ACPI Driver?
- Windows uses an ACPI driver to help control power features and manage resources on your computer.
- ACPI drivers provide communication between hardware components and Windows, allowing Windows to manage resources on your computer effectively.
ACPI drivers are installed on all compatible Windows operating systems. They allow your computer to save power when it’s not being used, allowing Windows to manage resources on your computer. They also help Windows to function correctly and control power-saving features.
Windows can control power-saving features such as screen brightness and hard drive spin down when your computer uses ACPI.
What is ACPI BIOS Error?
The BIOS is a set of instructions that tell your computer how to perform essential functions. The ACPI component in the BIOS helps Windows communicate with your computer’s hardware.
When your computer’s ACPI function is not working correctly, it affects many different features in Windows. For example, your screen brightness may be incorrect, your hard drive may stay on longer than it should, and hibernation may not work correctly.
The ACPI BIOS error message appears when there is a problem with your computer’s ACPI function.
When you receive this error message, it means that Windows can’t communicate properly with your computer’s hardware, and in most cases, this is because of a faulty BIOS.
The following are the reasons why you may receive the “ACPI BIOS error” message:
How Do I Fix My ACPI Driver?
If you receive the “ACPI BIOS Error,” there are several things that you can try and fix:
Change Your Settings
- Click the Start button.
- Type Change advanced power settings and press Enter.
- You may make changes to your BIOS settings, such as turning off C1E support.
- If you are positive about making these changes, you should always remember to save them before restarting your computer, or all of your changes will be lost.
You can also try changing the ACPI driver settings in your computer if you use Windows 8 or 10. You can try disabling the ACPI driver and restarting your computer.
Reinstall Your Device Drivers
If you are using Windows 8 or Windows 10, you can try reinstalling the ACPI driver for your computer. You can download and install the latest device drivers for your hardware.
Back Up and System Restore
If you are using Windows 7 or 8, you can try the system restore feature. It is possible that your computer’s ACPI function may not be working correctly because of a system change that you may have made.
To back up your computer before restoring, go to Start > Control Panel > System & Security > System > select the System Protection tab > System Restore.
You can also try restoring to an earlier point of time when ACPI functioned correctly on your computer.
Reinstall Windows
If nothing works, you have to reinstall your operating system. If available on your computer, you can try using the “upgrade” option. You can then upgrade to another edition of Windows rather than perform a clean installation.
If you are unable to grasp information with text, follow this explanatory video to resolve your issue:
Что такое ACPI x64-based PC?
буковки ACPI говорят о том, что устройство отвечает открытому промышленному стандарту, чиферки-буковки x64-based говорят о том, процессор и соответственно материнская плата поддерживают ОС х64, ну РС соответственно персональный пк.
Таким образом такая надпись говорит о много, но фактически не значит ничего.
Что такое x32-based PC можно почитать тут, в чем его отличие от ACPI x64-based РСможно почитать тут.
Характеристики материнской платы ACPI x64-based PC
Материнская плата ACPI x64-based PC, довольно старая плата, по котороый найти информации достаточно сложно. Мы приведем суммарную иформацию компьютера, собранного на базе материнской платы ACPI x64-based PC. Данная суммараная информация, досталась над от владельца такого вот старого компьютера.
.jpg)
Суммарная информация
Компьютер:
Тип компьютера ACPI x64-based PC
Операционная система Microsoft Windows 7 Home Basic
Пакет обновления ОС Service Pack 1
Internet Explorer 9.0.8112.16421 (IE 9.0)
DirectX DirectX 11.0
Имя компьютера USER-ПК
Имя пользователя User
Вход в домен User-ПК
Дата / Время 2012-12-26 / 16:23
Системная плата:
Тип ЦП QuadCore Intel Core i5-2300, 2900 MHz (29 x 100)
Системная плата Zotac H67
Чипсет системной платы Intel Cougar Point H67, Intel Sandy Bridge
Системная память 4080 МБ (DDR3-1333 DDR3 SDRAM)
DIMM1: E30106A 2 ГБ DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 МГц) (8-8-8-22 @ 609 МГц) (7-7-7-20 @ 533 МГц) (6-6-6-17 @ 457 МГц)
DIMM3: E30106A 2 ГБ DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 МГц) (8-8-8-22 @ 609 МГц) (7-7-7-20 @ 533 МГц) (6-6-6-17 @ 457 МГц)
Тип BIOS AMI (03/17/2011)
Коммуникационный порт Последовательный порт (COM1)
Коммуникационный порт USB Serial Port (COM3)
Отображение:
Видеоадаптер AMD Radeon HD 6570 (1024 МБ)
Видеоадаптер AMD Radeon HD 6570 (1024 МБ)
3D-акселератор AMD Radeon HD 6570 (Turks)
Монитор Dell 2709W (HDMI) [27″ LCD] (TR0709330YTS)
Мультимедиа:
Звуковой адаптер ATI Radeon HDMI @ AMD Turks/Whistler/Thames — High Definition Audio Controller
Звуковой адаптер Intel Cougar Point HDMI @ Intel Cougar Point PCH — High Definition Audio Controller [B-3]
Звуковой адаптер Realtek ALC892 @ Intel Cougar Point PCH — High Definition Audio Controller [B-3]
Хранение данных:
Контроллер IDE Intel(R) 6 Series/C200 Series Chipset Family 2 port Serial ATA Storage Controller — 1C08
Контроллер IDE Intel(R) 6 Series/C200 Series Chipset Family 4 port Serial ATA Storage Controller — 1C00
Контроллер хранения данных AOWGC6JW IDE Controller
Контроллер хранения данных JMicron JMB36X Controller
Дисковый накопитель WDC WD10EARS-00Y5B1 ATA Device (1000 ГБ, SATA-II)
Оптический накопитель HP BD Writer bd340i ATA Device
Оптический накопитель IVOHC QJOLMZG12J SCSI CdRom Device
SMART-статус жёстких дисков OK
Разделы:
C: (NTFS) 195.2 ГБ (159.6 ГБ свободно)
D: (NTFS) 736.2 ГБ (662.0 ГБ свободно)
Общий объём 931.4 ГБ (821.6 ГБ свободно)
Ввод:
Клавиатура Клавиатура HID
Клавиатура Стандартная клавиатура PS/2
Мышь HID-совместимая мышь
Сеть:
Первичный адрес IP 192.168.1.193
Первичный адрес MAC 74-F0-6D-70-8C-76
Сетевой адаптер 802.11n Wireless LAN Card (192.168.1.193)
Сетевой адаптер Microsoft Virtual WiFi Miniport Adapter
Сетевой адаптер Realtek PCIe GBE Family Controller
Периферийные устройства:
Принтер Fax
Принтер Microsoft XPS Document Writer
Контроллер USB2 Intel Cougar Point PCH — USB EHCI #1 Controller [B-3]
Контроллер USB2 Intel Cougar Point PCH — USB EHCI #2 Controller [B-3]
Контроллер USB3 VIA USB 3.0 eXtensible Host Controller
USB-устройство Generic USB Hub
USB-устройство Generic USB Hub
USB-устройство USB Serial Converter
USB-устройство USB-устройство ввода
USB-устройство USB-устройство ввода
USB-устройство Оборудование Майкрософт — USB-клавиатура
USB-устройство Составное USB устройство